The Air Cycle Machines and Cooling Turbines operate as a component of the refrigeration system to provide cooling air conditioning for the passenger cabin. In conjunction with the heat exchangers, air flow is cooled, filtered and returned to the cabin.

The Air Cycle Machines and Cooling Turbines operate as a component of the refrigeration system to provide cooling air conditioning for the passenger cabin. In conjunction with the heat exchangers, air flow is cooled, filtered and returned to the cabin.

Wencor offers a variety of Airframe related FAA-PMA parts for use in doors, fuselages and airframe structures, lighting, wings and windows. We also carry line replaceable items including filters and seals.

The Auxiliary Power Unit (APU) is a gas turbine engine utilized to provide pneumatic power for main engine starting, pneumatic power for cabin air conditioning, and back-up electrical power via a generator. The APU is primarily used during taxi, take-off and landing.

Wencor offers a variety of FAA-PMA replacement parts for Auxiliary Power Units.

The term "Avionics" covers a broad range of applications including vertical and directional gyros, weather radar units, horizon indicators, and other navigation instruments found in the cockpit.

Wencor has FAA-PMA parts available for Fuel Systems covering a variety of applications including main engine fuel pumps and controls and fuel boost pumps.

Wencor offers a variety of FAA-PMA replacement parts for engine and electric motor driven hydraulic pumps, power transfer units, hydraulic actuators and other hydraulic components.

A Constant Speed Drive (CSD) is a transmission which converts input from the engine accessory gearbox and generates a constant RPM output to an attached generator through a series of reduction gears.

An Integrated Drive Generator (IDG) is a combination of both the transmission and generator in the same assembly, and converts input RPM from the engine assembly gearbox to generate a constant RPM in the generator.

Both the CSD and IDG are responsible for creating constant frequency electrical energy for electrical systems in an aircraft.

A Constant Speed Drive (CSD) is a transmission which converts input from the engine accessory gearbox and generates a constant RPM output to an attached generator through a series of reduction gears.

An Integrated Drive Generator (IDG) is a combination of both the transmission and generator in the same assembly, and converts input RPM from the engine assembly gearbox to generate a constant RPM in the generator.

Both the CSD and IDG are responsible for creating constant frequency electrical energy for electrical systems in an aircraft.

Wencor offers a variety of FAA-PMA replacement parts for nose and main landing gear on most commercial, regional and general aviation aircraft. This includes wheel and brake bearings and seals.

Wencor offers an assortment of FAA-PMAs for use in pneumatic applications. These applications include but are not limited to pneumatic shut-off valves, bleed air valves, anti-ice valves, pressure regulating shut-off valves, starter valves and bleed air ballscrew actuators.

Wencor offers a variety of FAA-PMA parts in thrust reverser and cowl applications including thrust reverser ballscrew actuators, locking & non-locking actuators, seals and blocker doors.

Wencor has an assortment of FAA-PMA parts available for Turbine Engines. These PMAs are available for the engine gas path, combustion chamber, compressor, engine accessory gearbox and other engine components.